The first and only adjustable A/4WD upper control arm on the market
These DO fit ZR2 optioned trucks
Rugged steel adjustment tubes
Teflon (PTFE) lined chromoly rod ends for maximum life and minimum friction
On-vehicle adjustable, no unbolting needed
No shims or cam bolt adjustments needed, EVER
Grade 8 fasteners
Comes with anti seize pre-applied to aid in adjustment and prevent galling
Comes pre-greased
Comes ready to install
A must for lifted vehicles with excessive negative camber
Note: A very small amount of clearancing is needed on 2 of the 4 ball joint to plate bolt holes on each side to fit a stock 4WD ball joint. Otherwise a stock 2WD ball joint bolts in perfectly, an extra washer under the castle nut will be needed to properly engage with the cotter key.
Weight | 10 lbs |
---|---|
Dimensions | 12 × 12 × 6 in |
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
You may also like…
-
Rod End Spray by WD-40
$9.99Quick ViewAdd to cart> Dry spray eliminates the possibility of dirt and grit sticking to the bearing surface which prematurely wears rod ends > Contains Teflon to aid in friction reduction and prolonged life > Aids in AN hose assembly > Great for seat tracks, door hinges, carburator throttle shafts etc etc
Related products
-
Universal Proportioning Valve
$42.99Quick ViewAdd to cartUniversal proportioning valve placed in-line with the rear hard line will modulate the rear brakes Rear brakes applying harder and locking before the front is extremely dangerous and when installed and adjusted right this helps to eliminate that
-
1978-1988 A/G-Body Adjustable Front Upper Control Arms
$449.99Quick ViewAdd to cartThe most affordable adjustable upper control arm on the market, in fact most competitors’ non adjustable arms are hundreds more 6061-t6 adjustment tubes Teflon (PTFE) lined chromoly rod ends for maximum life and minimum friction 7075 forged aluminum cross shaft Integral ball joint holder offers smaller and lighter packaging +1” Howe ball joints improve camber …
1978-1988 A/G-Body Adjustable Front Upper Control ArmsRead More
-
1982-2002 A/4WD S-10 Adjustable Pro-Touring Front Upper Control Arms
$399.99Quick ViewAdd to cartThe first and only adjustable A/4WD upper control arm on the market These DO fit ZR2 optioned trucks Rugged steel adjustment tubes +1” Howe ball joints improve camber gain through travel, with almost 0 friction Integral ball joint holder offers smaller and lighter packaging Teflon (PTFE) lined chromoly rod ends for maximum life and minimum …
1982-2002 A/4WD S-10 Adjustable Pro-Touring Front Upper Control ArmsRead More
Reviews
There are no reviews yet.