1978-1988 A/G-Body Rear Trailing Arm Fastener Set
$22.99
Includes
-8x Grade 8 1/2-13 bolts
-8x Grade 8 1/2-13 nylon insert nuts
-16x Grade 8 1/2 SAE flat washers
All yellow zinc coated for rust prevention
Torque to 75 lb/ft
Note: The factory fastener size was 12mm, meaning the holes are a hair(<.020) smaller than the fasteners, a 1/2″ drill bit will make very quick work of those holes and allow the install of these fasteners. Stock or otherwise M12 fasteners will work but our arms have 1/2″ ID bushing sleeves and holes.
| Weight | 3 lbs |
|---|
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
Related products
-
1978-1988 A/G-Body Rear Disc Brake Kit W/ Parking Brake
$344.99Quick ViewAdd to cartReplace old heavy drums with easy to maintain disc brakes Brand new, non-junkyard parts Kit Includes >Left and right caliper brackets >Left and right calipers >Hoses from caliper to hard line (unless purchasing new hard line the factory line must be shortened and re-flared) >Left and right rotors >Standard pads >All necessary fasteners Note: This …
1978-1988 A/G-Body Rear Disc Brake Kit W/ Parking BrakeRead More
-
1978-1988 A/G-Body Disc/Disc Combination (Proportioning) Valve Upgrade
$49.99Quick ViewAdd to cartFactory Disc/Disc valve, for cars with rear disc brake kits Note: May come as pictured or anodized to a brass color like the stock unit depending on what is in stock
-
GM Rubber Trailing Arm Bushings 1964-2002
$9.99Quick ViewAdd to cartSold in pairs When replacing upper trailing arms be sure to check the condition of your upper housing bushings Rubber allows a good bit of articulation while still absorbing a large amount of harshness from the road New parts at OEM quality to replace worn and cracked factory rubber Fits 64-67 68-72 73-77 78-88 midsize …
-
Large Bore Clip-In Wheel Cylinders For GM Drum Brakes
$35.99Quick ViewAdd to cartSold as a pair Increases stopping power of stock drum brakes significantly and noticeably Direct replacement for any “Clip-type” GM wheel cylinder Known fitment includes but is not limited to: >1978-1988 A/G-Body (Metric Chassis) >1982-1992 F-Body (factory drum rear) >1982-1990 S-10 / Sonoma
Reviews
There are no reviews yet.