1991-2002 2WD S-10 DOT Approved Stainless Steel Braided Brake Hose Kit (Factory Drum Rear)
$69.99
A must for any vehicle with rubber hoses as they swell, reducing stopping power and making the car pull to one side under braking
Will significantly increase brake pedal feel
The absolute best bang for your buck, inexpensive brake upgrade around.
NOTE: Check the wrench size of your front flare nuts (nut on the hard line that connects to the front hoses) Some trucks were offered with 1/4 front hard lines with 7/16-24 or 1/2-20 flare nuts. The wrench size for both will be 9/16 instead of 1/2 for 3/8-24 flare nuts on 3/16 hard line
For 7/16-20 flare nuts, two Weatherhead PN 7828 adapters are needed for these applications to use this kit, available at most NAPAs.
For 1/2-20 flare nuts, two Brakequip BQ260 fittings will adapt the hose kit to your hardline
| Weight | 5 lbs |
|---|---|
| Dimensions | 6 × 6 × 6 in |
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
Related products
-
1982-2002 2WD S-10 MCP Rear Disc Brake Kit Drilled / Slotted Rotor Upgrade
$79.99Quick ViewAdd to cartUpgrade your MCP rear disc brake kit to include drilled and slotted rotors *These are NOT recommended for actual track use as high heat will cause cracking around the holes
-
MCP Speed Bleeders
$12.99Quick ViewAdd to cart>Fit stock front calipers for 1978-1988 A/G-Bodies, 1982-1992 F-Body front calipers, 1982-2002 2WD S-10 front calipers, and MCP rear disc upgrades for A/G-Bodies >Allows bleeding with only one person >Simply crack the bleeder as normal and it will allow fluid out but not suck air back in >Tighten when finished
-
1982-1990 2WD S-10 Basic Brake (Stock Drum Rear) Upgrade Kit
$105.99Quick ViewAdd to cartThe best bang for your buck brake upgrade on the market Replace old rubber hoses that can collapse and make the car pull when the brakes are applied (sound familiar?) Tighten up brake feel with DOT approved hoses that do not swell under pressure Larger bore clip-in wheel cylinders refresh and improve the stopping power …
1982-1990 2WD S-10 Basic Brake (Stock Drum Rear) Upgrade KitRead More
-
Large Bore Clip-In Wheel Cylinders For GM Drum Brakes
$35.99Quick ViewAdd to cartSold as a pair Increases stopping power of stock drum brakes significantly and noticeably Direct replacement for any “Clip-type” GM wheel cylinder Known fitment includes but is not limited to: >1978-1988 A/G-Body (Metric Chassis) >1982-1992 F-Body (factory drum rear) >1982-1990 S-10 / Sonoma
Reviews
There are no reviews yet.