1991-2002 2WD S-10 DOT Approved Stainless Steel Braided Brake Hose Kit (Factory Drum Rear)
$69.99
A must for any vehicle with rubber hoses as they swell, reducing stopping power and making the car pull to one side under braking
Will significantly increase brake pedal feel
The absolute best bang for your buck, inexpensive brake upgrade around.
NOTE: Check the wrench size of your front flare nuts (nut on the hard line that connects to the front hoses) Some trucks were offered with 1/4 front hard lines with 7/16-24 or 1/2-20 flare nuts. The wrench size for both will be 9/16 instead of 1/2 for 3/8-24 flare nuts on 3/16 hard line
For 7/16-20 flare nuts, two Weatherhead PN 7828 adapters are needed for these applications to use this kit, available at most NAPAs.
For 1/2-20 flare nuts, two Brakequip BQ260 fittings will adapt the hose kit to your hardline
| Weight | 5 lbs |
|---|---|
| Dimensions | 6 × 6 × 6 in |
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
Related products
-
Replacement Standard Brake Pad MPC Rear Kit
$14.99Quick ViewAdd to cartStandard, affordable pad, that comes in our rear disc kit. Pads fit: >MPC rear disc brake kits >1982-2002 2WD S-10 front calipers >1982-2002 F-body front calipers >1978-1988 A/G-Body front calipers Note: Sold as an axle set, meaning two sets are needed to do the front and rear of the vehicle
-
1982-2002 2WD S-10 Front Drilled / Slotted Rotor Upgrade
$99.99Quick ViewAdd to cartSold as a pair Upgrade the look of your ride with our drilled and slotted slotted rotors Direct bolt on with simple installation steps Does include tone ring for vehicles equipped with ABS *These are NOT recommended for actual track use as high heat will cause cracking around the holes
-
1982-2002 2WD S-10 Adjustable Front Upper Control Arms
$524.99Quick ViewAdd to cartThe most affordable adjustable 2WD upper control arm on the market, in fact most competitors’ non adjustable arms are hundreds more 6061-t6 adjustment tubes Teflon (PTFE) lined chromoly rod ends for maximum life and minimum friction 7075 forged aluminum cross shaft Integral ball joint holder offers smaller and lighter packaging +1” Howe ball joints improve …
1982-2002 2WD S-10 Adjustable Front Upper Control ArmsRead More
-
1982-2002 2WD S-10 DOT Approved Front Brake Hoses
$45.99Quick ViewAdd to cartThis front only kit fills the need for S-10 trucks with rear end swaps such as the Ford 8.8 and 9″ Tighten up your brake pedal significantly and deliver more stopping power to your front calipers NOTE: Check the wrench size of your front flare nuts (nut on the hard line that connects to the …
Reviews
There are no reviews yet.