The first and only adjustable A/4WD upper control arm on the market
These DO fit ZR2 optioned trucks
Rugged steel adjustment tubes
+1” Howe ball joints improve camber gain through travel, with almost 0 friction
Integral ball joint holder offers smaller and lighter packaging
Teflon (PTFE) lined chromoly rod ends for maximum life and minimum friction
On-vehicle adjustable, no unbolting needed
No shims or cam bolt adjustments needed, EVER
Grade 8 fasteners
Comes with anti seize pre-applied to aid in adjustment and prevent galling
Comes pre-greased
Comes ready to install
Perfect for lowered vehicles
Weight | 10 lbs |
---|---|
Dimensions | 12 × 12 × 6 in |
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
You may also like…
-
Rod End Spray by WD-40
$9.99Quick ViewAdd to cart> Dry spray eliminates the possibility of dirt and grit sticking to the bearing surface which prematurely wears rod ends > Contains Teflon to aid in friction reduction and prolonged life > Aids in AN hose assembly > Great for seat tracks, door hinges, carburator throttle shafts etc etc
-
Ball Joint Grease
$9.99Quick ViewAdd to cartRust and oxidation inhibitors Water resistant Excellent stability Long storage life We highly recommend you use this grease for our uppers, and give them a squirt of grease often (remember to wipe underneath so grease isn’t everywhere)
Related products
-
Universal Proportioning Valve
$42.99Quick ViewAdd to cartUniversal proportioning valve placed in-line with the rear hard line will modulate the rear brakes Rear brakes applying harder and locking before the front is extremely dangerous and when installed and adjusted right this helps to eliminate that
-
Adjustable Suspension Limiting Straps
$39.99Quick ViewAdd to cartSold as a pair Adjustable from approximately 4″ to 14″ with custom lengths available Strap material is made from high strength polyester just like a seatbelt. NOT nylon, which wears faster and loses strength when wet Thick end hardware with 3/8″ holes to bolt to the frame and control arm Slide adjusters at both ends …
-
1978-1988 A/G-Body Adjustable Rear Upper Trailing Arm Kit
$199.99Quick ViewAdd to cartSold as a complete pair Teflon (PTFE) lined chromoly rod ends for maximum life and minimum friction 6061-T6 aluminum adjustment tube Comes with anti seize pre-applied to aid in adjustment and prevent galling
-
1982-2002 2WD S-10 Adjustable Front Upper Control Arms
$524.99Quick ViewAdd to cartThe most affordable adjustable 2WD upper control arm on the market, in fact most competitors’ non adjustable arms are hundreds more 6061-t6 adjustment tubes Teflon (PTFE) lined chromoly rod ends for maximum life and minimum friction 7075 forged aluminum cross shaft Integral ball joint holder offers smaller and lighter packaging +1” Howe ball joints improve …
1982-2002 2WD S-10 Adjustable Front Upper Control ArmsRead More
Reviews
There are no reviews yet.