Category: Circle Track
Showing all 12 resultsSorted by price: high to low
-
1978-1988 A/G-Body Rear Disc Brake Kit W/o Parking Brake
$284.99Quick ViewAdd to cartReplace old heavy drums with easy to maintain disc brakes Brand new, non-junkyard parts Kit Includes >Left and right caliper brackets >Left and right calipers >Hoses from caliper to hard line (unless purchasing new hard line the factory line must be shortened and re-flared) >Left and right rotors >Standard pads >All necessary fasteners *Shown with …
1978-1988 A/G-Body Rear Disc Brake Kit W/o Parking BrakeRead More
-
GM Monoball Trailing Arm Bushings 1964-2002
$99.99Quick ViewAdd to cartSold in pairs When replacing upper trailing arms be sure to check the condition of your upper housing bushings Monoballs offer friction free articulation between the limits of their travel, with the drawback being increased road vibrations New parts to replace worn and cracked factory rubber Fits >64-67 68-72 73-77 78-88 midsize A/G-Body cars, all …
-
1978-1988 A/G-Body DOT Approved Stainless Steel Braided Brake Hose Kit
$84.99Quick ViewAdd to cartIncludes frame to rear end hose that most kits do not A must for any vehicle with rubber hoses as they swell, reducing stopping power and making the car pull to one side under braking Will significantly increase brake pedal feel The absolute best bang for your buck, inexpensive brake upgrade around
-
Hawk Performance Pads
$77.99Quick ViewAdd to cartDon’t upgrade your entire brake system just to leave daily driver quality pads on your ride. Get the absolute most out of your MPC brakes Pads fit: >MPC rear disc brake kits >1982-2002 2WD S-10 front calipers >1982-2002 F-body front calipers >1978-1988 A/G-Body front calipers Note: Sold as an axle set, meaning two sets are …
-
Universal Proportioning Valve
$42.99Quick ViewAdd to cartUniversal proportioning valve placed in-line with the rear hard line will modulate the rear brakes Rear brakes applying harder and locking before the front is extremely dangerous and when installed and adjusted right this helps to eliminate that
-
Large Bore Bolt-In Wheel Cylinders For GM Drum Brakes
$35.99Quick ViewAdd to cartSold as a pair Increases stopping power of stock drum brakes significantly and noticeably Direct replacement for any ~1.367″ bore backing plate that uses bolt-in wheel cylinder Known fitment includes but is not limited to: >1964-1967 A-Body >1968-1972 A-Body >1973-1977 A-Body >1977-1996 B-Body* >1970-1981 F-Body >1993-1997 F-Body >1968-1974 X-Body >1992-2002 S-10 Note: The oversize vs. …
Large Bore Bolt-In Wheel Cylinders For GM Drum BrakesRead More
-
Large Bore Clip-In Wheel Cylinders For GM Drum Brakes
$35.99Quick ViewAdd to cartSold as a pair Increases stopping power of stock drum brakes significantly and noticeably Direct replacement for any “Clip-type” GM wheel cylinder Known fitment includes but is not limited to: >1978-1988 A/G-Body (Metric Chassis) >1982-1992 F-Body (factory drum rear) >1982-1990 S-10 / Sonoma
-
GM Polyurethane Trailing Arm Bushings 1964-2002
$34.99Quick ViewAdd to cartSold in pairs When replacing upper trailing arms be sure to check the condition of your upper housing bushings Polyurethane offers a tighter suspension feel while still eliminating a moderate amount of road harshness New parts to replace worn and cracked factory rubber Fits >64-67 68-72 73-77 78-88 midsize A/G-Body cars, all 8 rear end …
-
1978-1988 A/G-Body MCP Rear Disc Brake Kit Caliper Spacer Upgrade
$19.99Quick ViewAdd to cartAllows the caliper piston to remain square in its bore by taking up the difference between the caliper designed for 1″ rotors and the aftermarket .810″ thick rotor Results in more even pad wear and therefore longer pad life A must for expensive pads, protect your investment!
-
MCP Speed Bleeders
$12.99Quick ViewAdd to cart>Fit stock front calipers for 1978-1988 A/G-Bodies, 1982-1992 F-Body front calipers, 1982-2002 2WD S-10 front calipers, and MCP rear disc upgrades for A/G-Bodies >Allows bleeding with only one person >Simply crack the bleeder as normal and it will allow fluid out but not suck air back in >Tighten when finished
-
GM Rubber Trailing Arm Bushings 1964-2002
$9.99Quick ViewAdd to cartSold in pairs When replacing upper trailing arms be sure to check the condition of your upper housing bushings Rubber allows a good bit of articulation while still absorbing a large amount of harshness from the road New parts at OEM quality to replace worn and cracked factory rubber Fits 64-67 68-72 73-77 78-88 midsize …
-
Rod End Spray by WD-40
$9.99Quick ViewAdd to cart> Dry spray eliminates the possibility of dirt and grit sticking to the bearing surface which prematurely wears rod ends > Contains Teflon to aid in friction reduction and prolonged life > Aids in AN hose assembly > Great for seat tracks, door hinges, carburator throttle shafts etc etc