1978-1988 A/G-Body Performance Disc Brake Kit W/ Parking Brake
$549.99
Outpacing (or out-stopping) this kit requires thousands of dollars
Includes our rear disc kit w/ parking brake
Braided hoses for the front and frame to rear end to tighten brake feel
Large bore front calipers deliver more clamping force to the rotor
Brand new, non-junkyard parts
Note: The MCP rear disc brake conversion included in this kit only works with 15″ or larger wheels
Note: We do not include front rotors, we recommend sourcing them locally. If using aggressive pads which are hard on rotors (like our Hawk pad upgrade) we recommend purchasing lifetime warranty rotors and switching them as needed
Note: In very high heat applications we recommend removing the 4 O-rings in each caliper that ride on the slide pin
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
You may also like…
-
Universal Proportioning Valve
$42.99Quick ViewAdd to cartUniversal proportioning valve placed in-line with the rear hard line will modulate the rear brakes Rear brakes applying harder and locking before the front is extremely dangerous and when installed and adjusted right this helps to eliminate that
-
1978-1988 A/G-Body Pre-Bent Stainless Steel Rear Hard Lines For Disc Brake Upgrade On Factory Rear
$44.99Quick ViewAdd to cart>Eliminates need to shorten factory lines >Pre-bent for a perfect fit >Pre-flared for a truly bolt on design >Stainless steel to last a lifetime Note: Must be used with the stainless braided line upgrade, standard hoses in the disc brake upgrade kit are too short *Actual part not shown
-
Hawk Performance Pads
$77.99Quick ViewAdd to cartDon’t upgrade your entire brake system just to leave daily driver quality pads on your ride. Get the absolute most out of your MPC brakes Pads fit: >MPC rear disc brake kits >1982-2002 2WD S-10 front calipers >1982-2002 F-body front calipers >1978-1988 A/G-Body front calipers Note: Sold as an axle set, meaning two sets are …
-
1982-2002 2WD S-10 DOT Stainless Steel Braided Hose for MCP Rear Disc Kit Upgrade
$45.99Quick ViewAdd to cartA great upgrade to our rear brake kits, eliminating the rubber hose and replacing with stainless braided hose will significantly improve pedal feel by transferring braking power that was lost in the swelling of the rubber hose to the caliper
Related products
-
1978-1988 A/G-Body Rear Trailing Arm Fastener Set
$22.99Quick ViewAdd to cartIncludes -8x Grade 8 1/2-13 bolts -8x Grade 8 1/2-13 nylon insert nuts -16x Grade 8 1/2 SAE flat washers All yellow zinc coated for rust prevention Torque to 75 lb/ft Note: The factory fastener size was 12mm, meaning the holes are a hair(<.020) smaller than the fasteners, a 1/2″ drill bit will make very …
-
1978-1988 A/G-Body Large Bore Front Calipers
$149.99Quick ViewAdd to cartSold as a pair Unidirectional, be sure to install the bleeder pointing up Large bore front calipers have been redesigned to not only be lighter but stronger than the stock unit These all new calipers deliver over 20% more clamping force at the rotor, much more than the popular but expensive “Blazer” upgrade Maintaining stock …
-
GM Monoball Trailing Arm Bushings 1964-2002
$99.99Quick ViewAdd to cartSold in pairs When replacing upper trailing arms be sure to check the condition of your upper housing bushings Monoballs offer friction free articulation between the limits of their travel, with the drawback being increased road vibrations New parts to replace worn and cracked factory rubber Fits >64-67 68-72 73-77 78-88 midsize A/G-Body cars, all …
Reviews
There are no reviews yet.