Outpacing (or out-stopping) this kit usually requires thousands of dollars
Includes our rear disc kit w/o parking brake
Braided hoses for the front and from the frame to rear end to significantly tighten brake feel
Large bore front calipers deliver more clamping force to the rotor
All brand new, non-junkyard parts
Note: The MCP rear disc brake conversion included in this kit only works with 15″ or larger wheels
Note: We do not include front rotors, we recommend sourcing them locally. If using aggressive pads which are hard on rotors (like our Hawk pad upgrade) we recommend purchasing lifetime warranty rotors and switching them as needed
Note: In very high heat applications we recommend removing the 4 O-rings in each caliper that ride on the slide pin
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
You may also like…
-
Universal Proportioning Valve
$42.99Quick ViewAdd to cartUniversal proportioning valve placed in-line with the rear hard line will modulate the rear brakes Rear brakes applying harder and locking before the front is extremely dangerous and when installed and adjusted right this helps to eliminate that
-
MCP Speed Bleeders
$12.99Quick ViewAdd to cart>Fit stock front calipers for 1978-1988 A/G-Bodies, 1982-1992 F-Body front calipers, 1982-2002 2WD S-10 front calipers, and MCP rear disc upgrades for A/G-Bodies >Allows bleeding with only one person >Simply crack the bleeder as normal and it will allow fluid out but not suck air back in >Tighten when finished
-
1978-1988 A/G-Body Pre-Bent OEM Steel Rear Hard Lines For Disc Brake Upgrade On Factory Rear
$34.99Quick ViewAdd to cartEliminates need to shorten factory lines Pre-bent for a perfect fit Pre-flared for a truly bolt on design Note: Must be used with the stainless braided line upgrade, standard hoses in the disc brake upgrade kit are too short *Actual part not shown
-
1978-1988 A/G-Body MCP Rear Disc Brake Kit Caliper Spacer Upgrade
$19.99Quick ViewAdd to cartAllows the caliper piston to remain square in its bore by taking up the difference between the caliper designed for 1″ rotors and the aftermarket .810″ thick rotor Results in more even pad wear and therefore longer pad life A must for expensive pads, protect your investment!
Related products
-
1978-1988 A/G-Body Rear Trailing Arm Fastener Set
$22.99Quick ViewAdd to cartIncludes -8x Grade 8 1/2-13 bolts -8x Grade 8 1/2-13 nylon insert nuts -16x Grade 8 1/2 SAE flat washers All yellow zinc coated for rust prevention Torque to 75 lb/ft Note: The factory fastener size was 12mm, meaning the holes are a hair(<.020) smaller than the fasteners, a 1/2″ drill bit will make very …
-
Steering Link Bump Steer Spacers For Increased Accuracy
$15.99Quick ViewAdd to cartIncludes one pair each of .100″, .060″, .030″ spacers Increased accuracy to further adjust and reduce your bump steer, if needed One set does one car
-
1978-1988 A/G-Body Adjustable Front Upper Control Arms
$524.99Quick ViewAdd to cartThe most affordable adjustable upper control arm on the market, in fact most competitors’ non adjustable arms are hundreds more 6061-t6 adjustment tubes Teflon (PTFE) lined chromoly rod ends for maximum life and minimum friction 7075 forged aluminum cross shaft Integral ball joint holder offers smaller and lighter packaging +1” Howe ball joints improve camber …
1978-1988 A/G-Body Adjustable Front Upper Control ArmsRead More
-
1978-1988 A/G-Body Steering Link Kit
$219.99Quick ViewAdd to cartTeflon (PTFE) lined chromoly rod ends for maximum life and minimum friction Half the weight of the factory tie rod assembly All needed fasteners included Replaces both inner and outer tie rods instead of just the outer like competitor pieces Black 6061-T6 Hard anodized adjustment tube A must to improve both cornering and straight line …
Reviews
There are no reviews yet.