1978-1988 A/G-Body Performance Disc Brake Kit W/ Parking Brake
$549.99
Outpacing (or out-stopping) this kit requires thousands of dollars
Includes our rear disc kit w/ parking brake
Braided hoses for the front and frame to rear end to tighten brake feel
Large bore front calipers deliver more clamping force to the rotor
Brand new, non-junkyard parts
Note: The MCP rear disc brake conversion included in this kit only works with 15″ or larger wheels
Note: We do not include front rotors, we recommend sourcing them locally. If using aggressive pads which are hard on rotors (like our Hawk pad upgrade) we recommend purchasing lifetime warranty rotors and switching them as needed
Note: In very high heat applications we recommend removing the 4 O-rings in each caliper that ride on the slide pin
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
You may also like…
-
1978-1988 A/G-Body Pre-Bent Stainless Steel Rear Hard Lines For Disc Brake Upgrade On Factory Rear
$44.99Quick ViewAdd to cart>Eliminates need to shorten factory lines >Pre-bent for a perfect fit >Pre-flared for a truly bolt on design >Stainless steel to last a lifetime Note: Must be used with the stainless braided line upgrade, standard hoses in the disc brake upgrade kit are too short *Actual part not shown
-
1978-1988 A/G-Body Pre-Bent OEM Steel Rear Hard Lines For Disc Brake Upgrade On Factory Rear
$34.99Quick ViewAdd to cartEliminates need to shorten factory lines Pre-bent for a perfect fit Pre-flared for a truly bolt on design Note: Must be used with the stainless braided line upgrade, standard hoses in the disc brake upgrade kit are too short *Actual part not shown
-
1978-1988 A/G-Body Disc/Disc Combination (Proportioning) Valve Upgrade
$49.99Quick ViewAdd to cartFactory Disc/Disc valve, for cars with rear disc brake kits Note: May come as pictured or anodized to a brass color like the stock unit depending on what is in stock
-
Hawk Performance Pads
$77.99Quick ViewAdd to cartDon’t upgrade your entire brake system just to leave daily driver quality pads on your ride. Get the absolute most out of your MPC brakes Pads fit: >MPC rear disc brake kits >1982-2002 2WD S-10 front calipers >1982-2002 F-body front calipers >1978-1988 A/G-Body front calipers Note: Sold as an axle set, meaning two sets are …
Related products
-
Large Bore Clip-In Wheel Cylinders For GM Drum Brakes
$35.99Quick ViewAdd to cartSold as a pair Increases stopping power of stock drum brakes significantly and noticeably Direct replacement for any “Clip-type” GM wheel cylinder Known fitment includes but is not limited to: >1978-1988 A/G-Body (Metric Chassis) >1982-1992 F-Body (factory drum rear) >1982-1990 S-10 / Sonoma
-
Saginaw Manual Box Swap Pitman Arm
$49.99Quick ViewAdd to cartThe proper geometry pitman arm for a manual box swap on many GM vehicles. A pitman arm from a power box will not fit a manual box as the output shaft sizes are different Brand new, with black a E-coat finish Fits 1982-1992 F-Bodies 1978-1988 G-Bodies With manual box swaps These will bolt in place …
-
GM Rubber Trailing Arm Bushings 1964-2002
$9.99Quick ViewAdd to cartSold in pairs When replacing upper trailing arms be sure to check the condition of your upper housing bushings Rubber allows a good bit of articulation while still absorbing a large amount of harshness from the road New parts at OEM quality to replace worn and cracked factory rubber Fits 64-67 68-72 73-77 78-88 midsize …
-
1978-1988 A/G-Body Rear Trailing Arm Fastener Set
$22.99Quick ViewAdd to cartIncludes -8x Grade 8 1/2-13 bolts -8x Grade 8 1/2-13 nylon insert nuts -16x Grade 8 1/2 SAE flat washers All yellow zinc coated for rust prevention Torque to 75 lb/ft Note: The factory fastener size was 12mm, meaning the holes are a hair(<.020) smaller than the fasteners, a 1/2″ drill bit will make very …
Reviews
There are no reviews yet.