Replace old heavy drums with easy to maintain disc brakes
Brand new, non-junkyard parts
Kit Includes
>Left and right caliper brackets
>Left and right calipers
>Hoses from caliper to hard line (unless purchasing new hard line the factory line must be shortened and re-flared)
>Left and right rotors
>Standard pads
>All necessary fasteners
*Shown with optional braided hoses and replacement stainless hard line
Note: This kit only works with 15″ or larger wheels
Weight | 50 lbs |
---|---|
Dimensions | 12 × 12 × 12 in |
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
You may also like…
-
1978-1988 A/G-Body MCP Rear Disc Brake Kit Drilled / Slotted Rotor Upgrade
$79.99Quick ViewAdd to cartUpgrade your MCP rear disc brake kit to include drilled and slotted rotors *These are NOT recommended for actual track use as high heat will cause cracking around the holes
-
Hawk Performance Pads
$77.99Quick ViewAdd to cartDon’t upgrade your entire brake system just to leave daily driver quality pads on your ride. Get the absolute most out of your MPC brakes Pads fit: >MPC rear disc brake kits >1982-2002 2WD S-10 front calipers >1982-2002 F-body front calipers >1978-1988 A/G-Body front calipers Note: Sold as an axle set, meaning two sets are …
-
1978-1988 A/G-Body Pre-Bent OEM Steel Rear Hard Lines For Disc Brake Upgrade On Factory Rear
$34.99Quick ViewAdd to cartEliminates need to shorten factory lines Pre-bent for a perfect fit Pre-flared for a truly bolt on design Note: Must be used with the stainless braided line upgrade, standard hoses in the disc brake upgrade kit are too short *Actual part not shown
-
1978-1988 A/G-Body Disc/Disc Adjustable Combination (Proportioning) Valve Upgrade
$82.99Quick ViewAdd to cartDirectly bolts in place of factory unit Aftermarket combination valve, for cars with rear disc brake upgrades Allows adjustment of rear pressure to better match the front brakes Comes with bleed tool included TOO MUCH REAR BRAKE CAN BE A SAFETY HAZARD
Related products
-
1978-1988 A/G-Body High Angle Quick Steer Spindle Kit
$359.99Quick ViewAdd to cartNot only does this increase lock angle but it significantly reduces the steering ratio, making the steering 25% quicker without having to change the box High steering angle spindles that offer up to 63% more steering angle (from ~64°stock to 100°+ lock to lock) Forged steel components in a modular design Retains factory brake hardware …
1978-1988 A/G-Body High Angle Quick Steer Spindle KitRead More
-
Large Bore Clip-In Wheel Cylinders For GM Drum Brakes
$35.99Quick ViewAdd to cartSold as a pair Increases stopping power of stock drum brakes significantly and noticeably Direct replacement for any “Clip-type” GM wheel cylinder Known fitment includes but is not limited to: >1978-1988 A/G-Body (Metric Chassis) >1982-1992 F-Body (factory drum rear) >1982-1990 S-10 / Sonoma
-
GM Rubber Trailing Arm Bushings 1964-2002
$9.99Quick ViewAdd to cartSold in pairs When replacing upper trailing arms be sure to check the condition of your upper housing bushings Rubber allows a good bit of articulation while still absorbing a large amount of harshness from the road New parts at OEM quality to replace worn and cracked factory rubber Fits 64-67 68-72 73-77 78-88 midsize …
-
Steering Link Bump Steer Spacers For Increased Accuracy
$15.99Quick ViewAdd to cartIncludes one pair each of .100″, .060″, .030″ spacers Increased accuracy to further adjust and reduce your bump steer, if needed One set does one car
Reviews
There are no reviews yet.