1978-1988 A/G-Body Rear Disc Brake Kit W/o Parking Brake
$284.99
Replace old heavy drums with easy to maintain disc brakes
Brand new, non-junkyard parts
Kit Includes
>Left and right caliper brackets
>Left and right calipers
>Hoses from caliper to hard line (unless purchasing new hard line the factory line must be shortened and re-flared)
>Left and right rotors
>Standard pads
>All necessary fasteners
*Shown with optional braided hoses and replacement stainless hard line
Note: This kit only works with 15″ or larger wheels
| Weight | 50 lbs |
|---|---|
| Dimensions | 12 × 12 × 12 in |
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
You may also like…
-
1978-1988 A/G-Body Disc/Disc Adjustable Combination (Proportioning) Valve Upgrade
$82.99Quick ViewAdd to cartDirectly bolts in place of factory unit Aftermarket combination valve, for cars with rear disc brake upgrades Allows adjustment of rear pressure to better match the front brakes Comes with bleed tool included TOO MUCH REAR BRAKE CAN BE A SAFETY HAZARD
-
Semi-Metallic Pads
$22.99Quick ViewAdd to cartDont upgrade your entire brake system just to leave daily driver quality pads on your ride. Get the absolute most out of your brakes. Pads fit: >MPC rear disc brake kits >1982-2002 2WD S-10 front calipers >1982-2002 F-body front calipers >1978-1988 A/G-Body front calipers Note: Sold as an axle set, meaning two sets are needed …
-
1978-1988 A/G-Body Pre-Bent OEM Steel Rear Hard Lines For Disc Brake Upgrade On Factory Rear
$34.99Quick ViewAdd to cartEliminates need to shorten factory lines Pre-bent for a perfect fit Pre-flared for a truly bolt on design Note: Must be used with the stainless braided line upgrade, standard hoses in the disc brake upgrade kit are too short *Actual part not shown
-
1978-1988 A/G-Body MCP Rear Disc Brake Kit Caliper Spacer Upgrade
$19.99Quick ViewAdd to cartAllows the caliper piston to remain square in its bore by taking up the difference between the caliper designed for 1″ rotors and the aftermarket .810″ thick rotor Results in more even pad wear and therefore longer pad life A must for expensive pads, protect your investment!
Related products
-
1978-1988 A/G-Body Rear Trailing Arm Fastener Set
$22.99Quick ViewAdd to cartIncludes -8x Grade 8 1/2-13 bolts -8x Grade 8 1/2-13 nylon insert nuts -16x Grade 8 1/2 SAE flat washers All yellow zinc coated for rust prevention Torque to 75 lb/ft Note: The factory fastener size was 12mm, meaning the holes are a hair(<.020) smaller than the fasteners, a 1/2″ drill bit will make very …
-
Adjustable Sway Bar Rod-End End-Links
$69.99Quick ViewAdd to cartUsing a rod end to eliminate 2 bushings not only stiffens the rate of the sway bar, it also allows the end link to articulate more easily Adjustable between 4-6″ from control arm mount to sway bar mount -Teflon (PTFE) lined chromoly rod ends -Grade 8 fasteners -Custom CNC laser cut and bent steel bracket …
-
GM Polyurethane Trailing Arm Bushings 1964-2002
$34.99Quick ViewAdd to cartSold in pairs When replacing upper trailing arms be sure to check the condition of your upper housing bushings Polyurethane offers a tighter suspension feel while still eliminating a moderate amount of road harshness New parts to replace worn and cracked factory rubber Fits >64-67 68-72 73-77 78-88 midsize A/G-Body cars, all 8 rear end …
-
Steering Link Bump Steer Spacers For Increased Accuracy
$15.99Quick ViewAdd to cartIncludes one pair each of .100″, .060″, .030″ spacers Increased accuracy to further adjust and reduce your bump steer, if needed One set does one car
Reviews
There are no reviews yet.