Outpacing (or out-stopping) this kit usually requires thousands of dollars
Includes our rear disc kit w/o parking brake
Braided hoses for the front and from the frame to rear end to significantly tighten brake feel
Large bore front calipers deliver more clamping force to the rotor
All brand new, non-junkyard parts
Note: The MCP rear disc brake conversion included in this kit only works with 15″ or larger wheels
Note: We do not include front rotors, we recommend sourcing them locally. If using aggressive pads which are hard on rotors (like our Hawk pad upgrade) we recommend purchasing lifetime warranty rotors and switching them as needed
Note: In very high heat applications we recommend removing the 4 O-rings in each caliper that ride on the slide pin
Note: Some sources list the year GM changed housing flanges as 1988, if your housing flange is different than shown please use this kit
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
You may also like…
-
1978-1988 A/G-Body Pre-Bent OEM Steel Rear Hard Lines For Disc Brake Upgrade On Factory Rear
$34.99Quick ViewAdd to cartEliminates need to shorten factory lines Pre-bent for a perfect fit Pre-flared for a truly bolt on design Note: Must be used with the stainless braided line upgrade, standard hoses in the disc brake upgrade kit are too short *Actual part not shown
-
1978-1988 A/G-Body Front Drilled / Slotted Rotor Upgrade
$99.99Quick ViewAdd to cartSold as a pair Upgrade the look of your ride with our drilled and slotted slotted rotors Direct bolt on with simple installation steps Does include tone ring for vehicles equipped with ABS *These are NOT recommended for actual track use as high heat will cause cracking around the holes
-
1978-1988 A/G-Body MCP Rear Disc Brake Kit Drilled / Slotted Rotor Upgrade
$79.99Quick ViewAdd to cartUpgrade your MCP rear disc brake kit to include drilled and slotted rotors *These are NOT recommended for actual track use as high heat will cause cracking around the holes
-
1978-1988 A/G-Body Disc/Disc Combination (Proportioning) Valve Upgrade
$49.99Quick ViewAdd to cartFactory Disc/Disc valve, for cars with rear disc brake kits Note: May come as pictured or anodized to a brass color like the stock unit depending on what is in stock
Related products
-
1982-2002 2WD S-10 DOT Approved Front Brake Hoses
$45.99Quick ViewAdd to cartThis front only kit fills the need for S-10 trucks with rear end swaps such as the Ford 8.8 and 9″ Tighten up your brake pedal significantly and deliver more stopping power to your front calipers NOTE: Check the wrench size of your front flare nuts (nut on the hard line that connects to the …
-
1982-2002 2WD S-10 Performance Disc Brake Kit for 8.8 Explorer Swap
Quick ViewRead moreWhether your S-10 was originally equipped with rear disc brakes, you swapped to a factory style rear disc, or you already installed our MCP rear disc brake kit you still have room to improve your brake system. Includes: -DOT approved braided hoses for the front and our exclusive MCP brake hose kit for 8.8 swaps …
1982-2002 2WD S-10 Performance Disc Brake Kit for 8.8 Explorer SwapRead More
-
Large Bore Clip-In Wheel Cylinders For GM Drum Brakes
$35.99Quick ViewAdd to cartSold as a pair Increases stopping power of stock drum brakes significantly and noticeably Direct replacement for any “Clip-type” GM wheel cylinder Known fitment includes but is not limited to: >1978-1988 A/G-Body (Metric Chassis) >1982-1992 F-Body (factory drum rear) >1982-1990 S-10 / Sonoma
-
1982-2002 2WD S-10 Adjustable Front Upper Control Arms
$524.99Quick ViewAdd to cartThe most affordable adjustable 2WD upper control arm on the market, in fact most competitors’ non adjustable arms are hundreds more 6061-t6 adjustment tubes Teflon (PTFE) lined chromoly rod ends for maximum life and minimum friction 7075 forged aluminum cross shaft Integral ball joint holder offers smaller and lighter packaging +1” Howe ball joints improve …
1982-2002 2WD S-10 Adjustable Front Upper Control ArmsRead More
Reviews
There are no reviews yet.