1982-1991 2WD S-10 Rear Disc Brake Kit W/ Parking Brake
$344.99
Replace old heavy drums with easy to maintain disc brakes
Brand new, non-junkyard parts
Kit Includes
>Left and right caliper brackets
>Left and right calipers
>Hoses from caliper to hard line (unless purchasing new hard line the factory line must be shortened and re-flared)
>Left and right rotors
>Standard pads
>All necessary fasteners
Note: This kit only works with 15″ or larger wheels
Note: Some sources list the year GM changed housing flanges as 1988, if your housing flange is different than shown please use this kitÂ
| Weight | 50 lbs |
|---|---|
| Dimensions | 12 × 12 × 12 in |
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
You may also like…
-
MCP Speed Bleeders
$12.99Quick ViewAdd to cart>Fit stock front calipers for 1978-1988 A/G-Bodies, 1982-1992 F-Body front calipers, 1982-2002 2WD S-10 front calipers, and MCP rear disc upgrades for A/G-Bodies >Allows bleeding with only one person >Simply crack the bleeder as normal and it will allow fluid out but not suck air back in >Tighten when finished
-
1982-1988 2WD S-10 Disc/Disc Combination (Proportioning) Valve Upgrade
$49.99Quick ViewAdd to cartFactory Disc/Disc valve, for cars with rear disc brake kits Note: May come as pictured or anodized to a brass color like the stock unit depending on what is in stock
-
Universal Proportioning Valve
$42.99Quick ViewAdd to cartUniversal proportioning valve placed in-line with the rear hard line will modulate the rear brakes Rear brakes applying harder and locking before the front is extremely dangerous and when installed and adjusted right this helps to eliminate that
-
1982-2002 2WD S-10 MCP Rear Disc Brake Kit Caliper Spacer Upgrade
$19.99Quick ViewAdd to cartAllows the caliper piston to remain square in its bore by taking up the difference between the caliper designed for 1″ rotors and the aftermarket .810″ thick rotor Results in more even pad wear and therefore longer pad life A must for expensive pads, protect your investment!
Related products
-
1982-2002 2WD S-10 Steering Link Kit
$219.99Quick ViewAdd to cartTeflon (PTFE) lined chromoly rod ends for maximum life and minimum friction Half the weight of the factory tie rod assembly All needed fasteners included Replaces both inner and outer tie rods instead of just the outer like competitor pieces Black 6061-T6 Hard anodized adjustment tube A must to improve both cornering and straight line …
-
1982-2002 2WD S-10 DOT Approved Front Brake Hoses
$45.99Quick ViewAdd to cartThis front only kit fills the need for S-10 trucks with rear end swaps such as the Ford 8.8 and 9″ Tighten up your brake pedal significantly and deliver more stopping power to your front calipers NOTE: Check the wrench size of your front flare nuts (nut on the hard line that connects to the …
-
1982-1991 2WD S-10 Rear Disc Brake Kit W/o Parking Brake
$284.99Quick ViewAdd to cartReplace old heavy drums with easy to maintain disc brakes Brand new, non-junkyard parts Kit Includes >Left and right caliper brackets >Left and right calipers >Hoses from caliper to hard line (unless purchasing new hard line the factory line must be shortened and re-flared) >Left and right rotors >Standard pads >All necessary fasteners Note: This …
1982-1991 2WD S-10 Rear Disc Brake Kit W/o Parking BrakeRead More
-
Saginaw Manual Box Swap Pitman Arm
$49.99Quick ViewAdd to cartThe proper geometry pitman arm for a manual box swap on many GM vehicles. A pitman arm from a power box will not fit a manual box as the output shaft sizes are different Brand new, with black a E-coat finish Fits 1982-1992 F-Bodies 1978-1988 G-Bodies With manual box swaps These will bolt in place …
Reviews
There are no reviews yet.