Replace old heavy drums with easy to maintain disc brakes
Brand new, non-junkyard parts
Kit Includes
>Left and right caliper brackets
>Left and right calipers
>Hoses from caliper to hard line (unless purchasing new hard line the factory line must be shortened and re-flared)
>Left and right rotors
>Standard pads
>All necessary fasteners
Note: This kit only works with 15″ or larger wheels
Note: Some sources list the year GM changed housing flanges as 1988, if your housing flange is different than shown please use this kitÂ
Weight | 50 lbs |
---|---|
Dimensions | 12 × 12 × 12 in |
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
You may also like…
-
1982-2002 2WD S-10 Front Drilled / Slotted Rotor Upgrade
$99.99Quick ViewAdd to cartSold as a pair Upgrade the look of your ride with our drilled and slotted slotted rotors Direct bolt on with simple installation steps Does include tone ring for vehicles equipped with ABS *These are NOT recommended for actual track use as high heat will cause cracking around the holes
-
1982-2002 2WD S-10 MCP Rear Disc Brake Kit Caliper Spacer Upgrade
$19.99Quick ViewAdd to cartAllows the caliper piston to remain square in its bore by taking up the difference between the caliper designed for 1″ rotors and the aftermarket .810″ thick rotor Results in more even pad wear and therefore longer pad life A must for expensive pads, protect your investment!
-
Universal Proportioning Valve
$42.99Quick ViewAdd to cartUniversal proportioning valve placed in-line with the rear hard line will modulate the rear brakes Rear brakes applying harder and locking before the front is extremely dangerous and when installed and adjusted right this helps to eliminate that
-
Semi-Metallic Pads
$22.99Quick ViewAdd to cartDont upgrade your entire brake system just to leave daily driver quality pads on your ride. Get the absolute most out of your brakes. Pads fit: >MPC rear disc brake kits >1982-2002 2WD S-10 front calipers >1982-2002 F-body front calipers >1978-1988 A/G-Body front calipers Note: Sold as an axle set, meaning two sets are needed …
Related products
-
Large Bore Clip-In Wheel Cylinders For GM Drum Brakes
$35.99Quick ViewAdd to cartSold as a pair Increases stopping power of stock drum brakes significantly and noticeably Direct replacement for any “Clip-type” GM wheel cylinder Known fitment includes but is not limited to: >1978-1988 A/G-Body (Metric Chassis) >1982-1992 F-Body (factory drum rear) >1982-1990 S-10 / Sonoma
-
Large Bore Bolt-In Wheel Cylinders For GM Drum Brakes
$35.99Quick ViewAdd to cartSold as a pair Increases stopping power of stock drum brakes significantly and noticeably Direct replacement for any ~1.367″ bore backing plate that uses bolt-in wheel cylinder Known fitment includes but is not limited to: >1964-1967 A-Body >1968-1972 A-Body >1973-1977 A-Body >1977-1996 B-Body* >1970-1981 F-Body >1993-1997 F-Body >1968-1974 X-Body >1992-2002 S-10 Note: The oversize vs. …
Large Bore Bolt-In Wheel Cylinders For GM Drum BrakesRead More
-
1991-2002 2WD S-10 DOT Approved Stainless Steel Braided Brake Hose Kit (Factory Drum Rear)
$69.99Quick ViewAdd to cartA must for any vehicle with rubber hoses as they swell, reducing stopping power and making the car pull to one side under braking Will significantly increase brake pedal feel The absolute best bang for your buck, inexpensive brake upgrade around. NOTE: Check the wrench size of your front flare nuts (nut on the …
1991-2002 2WD S-10 DOT Approved Stainless Steel Braided Brake Hose Kit (Factory Drum Rear)Read More
-
1982-2002 2WD S-10 MCP Rear Disc Brake Kit Drilled / Slotted Rotor Upgrade
$79.99Quick ViewAdd to cartUpgrade your MCP rear disc brake kit to include drilled and slotted rotors *These are NOT recommended for actual track use as high heat will cause cracking around the holes
Reviews
There are no reviews yet.