1982-1992 F-Body Performance Disc Brake Kit W/o Parking Brake (Factory Drum Rear)
$514.99
Out of stock
Outpacing (or out-stopping) this kit requires thousands of dollars
Includes our rear disc kit without parking brake
Braided hoses for the front and frame to rear end to tighten brake feel, housing to rear caliper stainless hose upgrades available as well
Large bore front calipers deliver more clamping force to the rotor
Brand new, non-junkyard parts
Note: The MCP rear disc brake conversion included in this kit only works with 15″ or larger wheels
Note: We do not include front rotors, we recommend sourcing them locally. If using aggressive pads which are hard on rotors (like our Hawk pad upgrade) we recommend purchasing lifetime warranty rotors and switching them as needed
Note: In very high heat applications we recommend removing the 4 O-rings in each caliper that ride on the slide pin
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
You may also like…
-
MCP Speed Bleeders
$12.99Quick ViewAdd to cart>Fit stock front calipers for 1978-1988 A/G-Bodies, 1982-1992 F-Body front calipers, 1982-2002 2WD S-10 front calipers, and MCP rear disc upgrades for A/G-Bodies >Allows bleeding with only one person >Simply crack the bleeder as normal and it will allow fluid out but not suck air back in >Tighten when finished
-
Semi-Metallic Pads
$22.99Quick ViewAdd to cartDont upgrade your entire brake system just to leave daily driver quality pads on your ride. Get the absolute most out of your brakes. Pads fit: >MPC rear disc brake kits >1982-2002 2WD S-10 front calipers >1982-2002 F-body front calipers >1978-1988 A/G-Body front calipers Note: Sold as an axle set, meaning two sets are needed …
-
1982-1992 F-Body Pre-Bent OEM Steel Rear Hard Lines For Disc Brake Upgrade On Factory Drum Rear
$44.99Quick ViewAdd to cartEliminates need to shorten factory lines Pre-bent for a perfect fit Pre-flared for a truly bolt on design *Actual part not shown *Must upgrade from the hoses that come standard in the kit to stainless braided hoses
-
1982-1992 F-Body MCP Rear Disc Brake Kit Caliper Spacer Upgrade
$19.99Quick ViewAdd to cartAllows the caliper piston to remain square in its bore by taking up the difference between the caliper designed for 1″ rotors and the aftermarket .810″ thick rotor Results in more even pad wear and therefore longer pad life A must for expensive pads, protect your investment!
Related products
-
1991-2002 2WD S-10 DOT Approved Stainless Steel Braided Brake Hose Kit (Factory Drum Rear)
$69.99Quick ViewAdd to cartA must for any vehicle with rubber hoses as they swell, reducing stopping power and making the car pull to one side under braking Will significantly increase brake pedal feel The absolute best bang for your buck, inexpensive brake upgrade around. NOTE: Check the wrench size of your front flare nuts (nut on the …
1991-2002 2WD S-10 DOT Approved Stainless Steel Braided Brake Hose Kit (Factory Drum Rear)Read More
-
1982-1992 F-Body DOT Approved Stainless Steel Braided Brake Hose Kit (Factory Drum Rear)
$94.99Quick ViewAdd to cartIncludes frame to rear end hose that most kits do not A must for any vehicle with rubber hoses as they swell, reducing stopping power and making the car pull to one side under braking (sound familiar?) Will significantly increase brake pedal feel The absolute best bang for your buck, inexpensive brake upgrade you can …
1982-1992 F-Body DOT Approved Stainless Steel Braided Brake Hose Kit (Factory Drum Rear)Read More
-
Replacement Standard Brake Pad MPC Rear Kit
$14.99Quick ViewAdd to cartStandard, affordable pad, that comes in our rear disc kit. Pads fit: >MPC rear disc brake kits >1982-2002 2WD S-10 front calipers >1982-2002 F-body front calipers >1978-1988 A/G-Body front calipers Note: Sold as an axle set, meaning two sets are needed to do the front and rear of the vehicle
-
Sway Bar Rod-End End-Links
$64.99Quick ViewAdd to cartUsing a rod end to eliminate 2 bushings not only stiffens the rate of the sway bar, it also allows the end link to articulate more easily 6.5″ from control arm mount to sway bar mount -Teflon (PTFE) lined chromoly rod ends -Grade 8 fasteners -Custom CNC laser cut and bent steel bracket -Polyurethane bushings …
Reviews
There are no reviews yet.