1982-1992 F-Body Pre-Bent Stainless Steel Rear Hard Lines For Disc Brake Upgrade On Factory Drum Rear
$49.99
Eliminates need to shorten factory lines
Pre-bent for a perfect fit
Pre-flared for a truly bolt on design
Stainless steel to last a lifetime
*Actual part not shown
*Must upgrade from the hoses that come standard in the kit to stainless braided hoses
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
You may also like…
-
1982-1992 F-Body DOT Stainless Steel Braided Hose for MCP Rear Disc Kit Upgrade
$45.99Quick ViewAdd to cartA great upgrade to our rear brake kits, eliminating the rubber hose and replacing with stainless braided hose will significantly improve pedal feel by transferring braking power that was lost in the swelling of the rubber hose to the caliper Note: You must upgrade to this option if you are adding the hard line kits …
1982-1992 F-Body DOT Stainless Steel Braided Hose for MCP Rear Disc Kit UpgradeRead More
Related products
-
1982-1992 F-Body Pre-Bent OEM Steel Rear Hard Lines For Disc Brake Upgrade On Factory Drum Rear
$44.99Quick ViewAdd to cartEliminates need to shorten factory lines Pre-bent for a perfect fit Pre-flared for a truly bolt on design *Actual part not shown *Must upgrade from the hoses that come standard in the kit to stainless braided hoses
-
Saginaw Manual Box Swap Pitman Arm
$49.99Quick ViewAdd to cartThe proper geometry pitman arm for a manual box swap on many GM vehicles. A pitman arm from a power box will not fit a manual box as the output shaft sizes are different Brand new, with black a E-coat finish Fits 1982-1992 F-Bodies 1978-1988 G-Bodies With manual box swaps These will bolt in place …
-
Hawk Performance Pads
$77.99Quick ViewAdd to cartDon’t upgrade your entire brake system just to leave daily driver quality pads on your ride. Get the absolute most out of your MPC brakes Pads fit: >MPC rear disc brake kits >1982-2002 2WD S-10 front calipers >1982-2002 F-body front calipers >1978-1988 A/G-Body front calipers Note: Sold as an axle set, meaning two sets are …
-
GM U-Joint Steering Shaft Assembly ’79+
$109.99Quick ViewAdd to cartImportant: Verify your steering box input spline is 3/4-30 spine, if not it is most likely 13/16-30 spline which was ’77 and earlier Eliminate the worn rubber rag joint that came stock on your classic Firm up your steering significantly and eliminate slop, all while making more room for your header tubes A must for …
Reviews
There are no reviews yet.