1982-2002 A/4WD S-10 Adjustable Off-Road Steering Link Kit
$239.99
Teflon (PTFE) lined chromoly rod ends for maximum life and minimum friction High travel rod ends offer 15° more travel in either direction than a standard rod end (maximum pin to adjustment tube misalignment 32°) High quality Moog brand inner tie rods, with 90 degree grease zerk for ease of maintenance All needed fasteners included Heavy duty steel adjustment tube Bump steer adjustable, helpful for vehicles with altered ride heights Comes with anti seize pre-applied to aid in adjustment and prevent galling Zero drilling or machining needed, 100% bolt on
| Weight | 8 lbs |
|---|---|
| Dimensions | 21 × 4 × 4 in |
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
You may also like…
-
Steering Link Bump Steer Spacers For Increased Accuracy
$15.99Quick ViewAdd to cartIncludes one pair each of .100″, .060″, .030″ spacers Increased accuracy to further adjust and reduce your bump steer, if needed One set does one car
-
Rod End Spray by WD-40
$9.99Quick ViewAdd to cart> Dry spray eliminates the possibility of dirt and grit sticking to the bearing surface which prematurely wears rod ends > Contains Teflon to aid in friction reduction and prolonged life > Aids in AN hose assembly > Great for seat tracks, door hinges, carburator throttle shafts etc etc
Related products
-
Large Bore Clip-In Wheel Cylinders For GM Drum Brakes
$35.99Quick ViewAdd to cartSold as a pair Increases stopping power of stock drum brakes significantly and noticeably Direct replacement for any “Clip-type” GM wheel cylinder Known fitment includes but is not limited to: >1978-1988 A/G-Body (Metric Chassis) >1982-1992 F-Body (factory drum rear) >1982-1990 S-10 / Sonoma
-
GM Splined Column U-Joint Steering Shaft Assembly (’78 A/G-Body)
$109.99Quick ViewAdd to cartNote: These are specifically for GM application with splined column shafts, which were rare. 78 A/G-Body being the best example. Eliminate the rubber rag joint that came stock on your classic Firm up your steering significantly and eliminate slop, all while making more room for your header tubes A must for a corner carver or …
GM Splined Column U-Joint Steering Shaft Assembly (’78 A/G-Body)Read More
-
1982-2002 A/4WD S-10 Adjustable Pro-Touring Front Upper Control Arms
$399.99Quick ViewAdd to cartThe first and only adjustable A/4WD upper control arm on the market These DO fit ZR2 optioned trucks Rugged steel adjustment tubes +1” Howe ball joints improve camber gain through travel, with almost 0 friction Integral ball joint holder offers smaller and lighter packaging Teflon (PTFE) lined chromoly rod ends for maximum life and minimum …
1982-2002 A/4WD S-10 Adjustable Pro-Touring Front Upper Control ArmsRead More
-
GM U-Joint Steering Shaft Assembly ’79+
$109.99Quick ViewAdd to cartImportant: Verify your steering box input spline is 3/4-30 spine, if not it is most likely 13/16-30 spline which was ’77 and earlier Eliminate the worn rubber rag joint that came stock on your classic Firm up your steering significantly and eliminate slop, all while making more room for your header tubes A must for …
Reviews
There are no reviews yet.