The best bang for your buck brake upgrade on the market
Replace old rubber hoses that can collapse and make the car pull when the brakes are applied (sound familiar?)
Tighten up brake feel with DOT approved hoses that do not swell under pressure
Larger bore bolt-in wheel cylinders refresh and improve the stopping power of the rear drums
Brand new, non-junkyard parts
*Replacing pads and shoes in poor condition at the time of this upgrade is highly recommended
Note: Some sources list the year GM changed housing flanges as 1988, if your housing flange is different than shown please use this kit
NOTE: Check the wrench size of your front flare nuts (nut on the hard line that connects to the front hoses) Some trucks were offered with 1/4 front hard lines with 7/16-24 or 1/2-20 flare nuts. The wrench size for both will be 9/16 instead of 1/2 for 3/8-24 flare nuts on 3/16 hard line
For 7/16-20 flare nuts, two Weatherhead PN 7828 adapters are needed for these applications to use this kit, available at most NAPAs.
For 1/2-20 flare nuts, two Brakequip BQ260 fittings will adapt the hose kit to your hardline
Weight | 5 lbs |
---|---|
Dimensions | 6 × 6 × 6 in |
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
You may also like…
-
Hawk Performance Pads
$77.99Quick ViewAdd to cartDon’t upgrade your entire brake system just to leave daily driver quality pads on your ride. Get the absolute most out of your MPC brakes Pads fit: >MPC rear disc brake kits >1982-2002 2WD S-10 front calipers >1982-2002 F-body front calipers >1978-1988 A/G-Body front calipers Note: Sold as an axle set, meaning two sets are …
-
Semi-Metallic Pads
$22.99Quick ViewAdd to cartDont upgrade your entire brake system just to leave daily driver quality pads on your ride. Get the absolute most out of your brakes. Pads fit: >MPC rear disc brake kits >1982-2002 2WD S-10 front calipers >1982-2002 F-body front calipers >1978-1988 A/G-Body front calipers Note: Sold as an axle set, meaning two sets are needed …
-
MCP Speed Bleeders
$12.99Quick ViewAdd to cart>Fit stock front calipers for 1978-1988 A/G-Bodies, 1982-1992 F-Body front calipers, 1982-2002 2WD S-10 front calipers, and MCP rear disc upgrades for A/G-Bodies >Allows bleeding with only one person >Simply crack the bleeder as normal and it will allow fluid out but not suck air back in >Tighten when finished
Related products
-
1982-2002 2WD S-10 MCP Rear Disc Brake Kit Drilled / Slotted Rotor Upgrade
$79.99Quick ViewAdd to cartUpgrade your MCP rear disc brake kit to include drilled and slotted rotors *These are NOT recommended for actual track use as high heat will cause cracking around the holes
-
Large Bore Clip-In Wheel Cylinders For GM Drum Brakes
$35.99Quick ViewAdd to cartSold as a pair Increases stopping power of stock drum brakes significantly and noticeably Direct replacement for any “Clip-type” GM wheel cylinder Known fitment includes but is not limited to: >1978-1988 A/G-Body (Metric Chassis) >1982-1992 F-Body (factory drum rear) >1982-1990 S-10 / Sonoma
-
GM Combination (Proportioning) Valve Bleed Tool
$12.99Quick ViewAdd to cartA must have tool to bleed a factory style disc/drum or disc/disc combination valves *May come in variety of colors depending on supplier stock
-
1982-1991 2WD S-10 Rear Disc Brake Kit W/ Parking Brake
$344.99Quick ViewAdd to cartReplace old heavy drums with easy to maintain disc brakes Brand new, non-junkyard parts Kit Includes >Left and right caliper brackets >Left and right calipers >Hoses from caliper to hard line (unless purchasing new hard line the factory line must be shortened and re-flared) >Left and right rotors >Standard pads >All necessary fasteners Note: This …
1982-1991 2WD S-10 Rear Disc Brake Kit W/ Parking BrakeRead More
Reviews
There are no reviews yet.