1991-2002 2WD S-10 DOT Approved Stainless Steel Braided Brake Hose Kit (Factory Drum Rear)
$69.99
A must for any vehicle with rubber hoses as they swell, reducing stopping power and making the car pull to one side under braking
Will significantly increase brake pedal feel
The absolute best bang for your buck, inexpensive brake upgrade around.
NOTE: Check the wrench size of your front flare nuts (nut on the hard line that connects to the front hoses) Some trucks were offered with 1/4 front hard lines with 7/16-24 or 1/2-20 flare nuts. The wrench size for both will be 9/16 instead of 1/2 for 3/8-24 flare nuts on 3/16 hard line
For 7/16-20 flare nuts, two Weatherhead PN 7828 adapters are needed for these applications to use this kit, available at most NAPAs.
For 1/2-20 flare nuts, two Brakequip BQ260 fittings will adapt the hose kit to your hardline
| Weight | 5 lbs |
|---|---|
| Dimensions | 6 × 6 × 6 in |
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
Related products
-
Steering Link Bump Steer Spacers For Increased Accuracy
$15.99Quick ViewAdd to cartIncludes one pair each of .100″, .060″, .030″ spacers Increased accuracy to further adjust and reduce your bump steer, if needed One set does one car
-
MCP Speed Bleeders
$12.99Quick ViewAdd to cart>Fit stock front calipers for 1978-1988 A/G-Bodies, 1982-1992 F-Body front calipers, 1982-2002 2WD S-10 front calipers, and MCP rear disc upgrades for A/G-Bodies >Allows bleeding with only one person >Simply crack the bleeder as normal and it will allow fluid out but not suck air back in >Tighten when finished
-
Replacement Standard Brake Pad MPC Rear Kit
$14.99Quick ViewAdd to cartStandard, affordable pad, that comes in our rear disc kit. Pads fit: >MPC rear disc brake kits >1982-2002 2WD S-10 front calipers >1982-2002 F-body front calipers >1978-1988 A/G-Body front calipers Note: Sold as an axle set, meaning two sets are needed to do the front and rear of the vehicle
-
1982-2002 2WD S-10 Steering Link Kit
$219.99Quick ViewAdd to cartTeflon (PTFE) lined chromoly rod ends for maximum life and minimum friction Half the weight of the factory tie rod assembly All needed fasteners included Replaces both inner and outer tie rods instead of just the outer like competitor pieces Black 6061-T6 Hard anodized adjustment tube A must to improve both cornering and straight line …
Reviews
There are no reviews yet.