Replace old heavy drums with easy to maintain disc brakes
Brand new, non-junkyard parts
Kit Includes
>Left and right caliper brackets
>Left and right calipers
>Hoses from caliper to hard line (unless purchasing new hard line the factory line must be shortened and re-flared)
>Left and right rotors
>Standard pads
>All necessary fasteners
Note: This kit only works with 15″ or larger wheels
Note: Some sources list the year GM changed housing flanges as 1988, if your housing flange is different than shown please use this kit
Weight | 50 lbs |
---|---|
Dimensions | 12 × 12 × 12 in |
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
You may also like…
-
1982-2002 2WD S-10 Front Drilled / Slotted Rotor Upgrade
$99.99Quick ViewAdd to cartSold as a pair Upgrade the look of your ride with our drilled and slotted slotted rotors Direct bolt on with simple installation steps Does include tone ring for vehicles equipped with ABS *These are NOT recommended for actual track use as high heat will cause cracking around the holes
-
1982-2002 2WD S-10 MCP Rear Disc Brake Kit Caliper Spacer Upgrade
$19.99Quick ViewAdd to cartAllows the caliper piston to remain square in its bore by taking up the difference between the caliper designed for 1″ rotors and the aftermarket .810″ thick rotor Results in more even pad wear and therefore longer pad life A must for expensive pads, protect your investment!
-
Universal Proportioning Valve
$42.99Quick ViewAdd to cartUniversal proportioning valve placed in-line with the rear hard line will modulate the rear brakes Rear brakes applying harder and locking before the front is extremely dangerous and when installed and adjusted right this helps to eliminate that
-
1982-1988 2WD S-10 Disc/Disc Adjustable Combination (Proportioning) Valve Upgrade
$82.99Quick ViewAdd to cartDirectly bolts in place of factory unit Aftermarket combination valve, for cars with rear disc brake upgrades Allows adjustment of rear pressure to better match the front brakes Comes with bleed tool included TOO MUCH REAR BRAKE CAN BE A SAFETY HAZARD
Related products
-
1982-1991 2WD S-10 Rear Disc Brake Kit W/o Parking Brake
$284.99Quick ViewAdd to cartReplace old heavy drums with easy to maintain disc brakes Brand new, non-junkyard parts Kit Includes >Left and right caliper brackets >Left and right calipers >Hoses from caliper to hard line (unless purchasing new hard line the factory line must be shortened and re-flared) >Left and right rotors >Standard pads >All necessary fasteners Note: This …
1982-1991 2WD S-10 Rear Disc Brake Kit W/o Parking BrakeRead More
-
1992-2002 2WD S-10 Performance Disc Brake Kit W/o Parking Brake
$539.99Quick ViewAdd to cartOutpacing (or out-stopping) this kit usually requires thousands of dollars Includes our rear disc kit w/o parking brake Braided hoses for the front and from the frame to rear end to significantly tighten brake feel Large bore front calipers deliver more clamping force to the rotor All brand new, non-junkyard parts Note: The MCP rear …
1992-2002 2WD S-10 Performance Disc Brake Kit W/o Parking BrakeRead More
-
1991-2002 2WD S-10 Basic Brake (Factory Drum Rear) Upgrade Kit
$99.99Quick ViewAdd to cartThe best bang for your buck brake upgrade on the market Replace old rubber hoses that can collapse and make the car pull when the brakes are applied (sound familiar?) Tighten up brake feel with DOT approved hoses that do not swell under pressure Larger bore bolt-in wheel cylinders refresh and improve the stopping power …
1991-2002 2WD S-10 Basic Brake (Factory Drum Rear) Upgrade KitRead More
-
Saginaw Manual Box Swap Pitman Arm
$49.99Quick ViewAdd to cartThe proper geometry pitman arm for a manual box swap on many GM vehicles. A pitman arm from a power box will not fit a manual box as the output shaft sizes are different Brand new, with black a E-coat finish Fits 1982-1992 F-Bodies 1978-1988 G-Bodies With manual box swaps These will bolt in place …
Reviews
There are no reviews yet.