1978-1988 A/G-Body High Angle Quick Steer Spindle Kit
$359.99
Not only does this increase lock angle but it significantly reduces the steering ratio, making the steering 25% quicker without having to change the box
High steering angle spindles that offer up to 63% more steering angle (from ~64°stock to 100°+ lock to lock)
Forged steel components in a modular design
Retains factory brake hardware or can be upgraded with our brake components
Does not require new ball joints, bolts directly in place of the factory spindle
Note: Requires use of our bump steer adjustable steering links, with a modified outer pin
| Weight | 30 lbs |
|---|---|
| Dimensions | 10 × 10 × 10 in |
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
You may also like…
-
Hawk Performance Pads
$77.99Quick ViewAdd to cartDon’t upgrade your entire brake system just to leave daily driver quality pads on your ride. Get the absolute most out of your MPC brakes Pads fit: >MPC rear disc brake kits >1982-2002 2WD S-10 front calipers >1982-2002 F-body front calipers >1978-1988 A/G-Body front calipers Note: Sold as an axle set, meaning two sets are …
-
1978-1988 A/G-Body Large Bore Front Calipers
$149.99Quick ViewAdd to cartSold as a pair Unidirectional, be sure to install the bleeder pointing up Large bore front calipers have been redesigned to not only be lighter but stronger than the stock unit These all new calipers deliver over 20% more clamping force at the rotor, much more than the popular but expensive “Blazer” upgrade Maintaining stock …
-
1978-1988 A/G-Body Adjustable Front Upper Control Arms
$524.99Quick ViewAdd to cartThe most affordable adjustable upper control arm on the market, in fact most competitors’ non adjustable arms are hundreds more 6061-t6 adjustment tubes Teflon (PTFE) lined chromoly rod ends for maximum life and minimum friction 7075 forged aluminum cross shaft Integral ball joint holder offers smaller and lighter packaging +1” Howe ball joints improve camber …
1978-1988 A/G-Body Adjustable Front Upper Control ArmsRead More
Related products
-
1978-1988 A/G-Body Disc/Disc Combination (Proportioning) Valve Upgrade
$49.99Quick ViewAdd to cartFactory Disc/Disc valve, for cars with rear disc brake kits Note: May come as pictured or anodized to a brass color like the stock unit depending on what is in stock
-
GM Combination (Proportioning) Valve Bleed Tool
$12.99Quick ViewAdd to cartA must have tool to bleed a factory style disc/drum or disc/disc combination valves *May come in variety of colors depending on supplier stock
-
1978-1988 A/G-Body Steering Link Kit
$219.99Quick ViewAdd to cartTeflon (PTFE) lined chromoly rod ends for maximum life and minimum friction Half the weight of the factory tie rod assembly All needed fasteners included Replaces both inner and outer tie rods instead of just the outer like competitor pieces Black 6061-T6 Hard anodized adjustment tube A must to improve both cornering and straight line …
-
Universal Proportioning Valve
$42.99Quick ViewAdd to cartUniversal proportioning valve placed in-line with the rear hard line will modulate the rear brakes Rear brakes applying harder and locking before the front is extremely dangerous and when installed and adjusted right this helps to eliminate that
Reviews
There are no reviews yet.