1982-1992 F-Body Rear Disc Brake Kit W/o Parking Brake (Factory Drum Rear)
$284.99
Replace old heavy drums with easy to maintain disc brakes
Brand new, non-junkyard parts
Kit Includes
>Left and right caliper brackets
>Left and right calipers
>Hoses from caliper to hard line (unless purchasing new hard line the factory line must be shortened and re-flared)
>Left and right rotors
>Standard pads
>All necessary fasteners
Note: This kit only works with 15″ or larger wheels
| Weight | 50 lbs |
|---|---|
| Dimensions | 12 × 12 × 12 in |
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
You may also like…
-
1982-1992 F-Body Disc/Disc Combination (Proportioning) Valve Upgrade
$49.99Quick ViewAdd to cartFactory Disc/Disc valve, for cars with rear disc brake kits Note: May come as pictured or anodized to a brass color like the stock unit depending on what is in stock
-
1982-1992 F-Body DOT Approved Stainless Steel Braided Brake Hose Kit (Factory Drum Rear)
$94.99Quick ViewAdd to cartIncludes frame to rear end hose that most kits do not A must for any vehicle with rubber hoses as they swell, reducing stopping power and making the car pull to one side under braking (sound familiar?) Will significantly increase brake pedal feel The absolute best bang for your buck, inexpensive brake upgrade you can …
1982-1992 F-Body DOT Approved Stainless Steel Braided Brake Hose Kit (Factory Drum Rear)Read More
-
Hawk Performance Pads
$77.99Quick ViewAdd to cartDon’t upgrade your entire brake system just to leave daily driver quality pads on your ride. Get the absolute most out of your MPC brakes Pads fit: >MPC rear disc brake kits >1982-2002 2WD S-10 front calipers >1982-2002 F-body front calipers >1978-1988 A/G-Body front calipers Note: Sold as an axle set, meaning two sets are …
-
1982-1992 F-Body Pre-Bent OEM Steel Rear Hard Lines For Disc Brake Upgrade On Factory Drum Rear
$44.99Quick ViewAdd to cartEliminates need to shorten factory lines Pre-bent for a perfect fit Pre-flared for a truly bolt on design *Actual part not shown *Must upgrade from the hoses that come standard in the kit to stainless braided hoses
Related products
-
GM Monoball Trailing Arm Bushings 1964-2002
$99.99Quick ViewAdd to cartSold in pairs When replacing upper trailing arms be sure to check the condition of your upper housing bushings Monoballs offer friction free articulation between the limits of their travel, with the drawback being increased road vibrations New parts to replace worn and cracked factory rubber Fits >64-67 68-72 73-77 78-88 midsize A/G-Body cars, all …
-
Sway Bar Rod-End End-Links
$64.99Quick ViewAdd to cartUsing a rod end to eliminate 2 bushings not only stiffens the rate of the sway bar, it also allows the end link to articulate more easily 6.5″ from control arm mount to sway bar mount -Teflon (PTFE) lined chromoly rod ends -Grade 8 fasteners -Custom CNC laser cut and bent steel bracket -Polyurethane bushings …
-
1978-1988 A/G-Body MCP Rear Disc Brake Kit Caliper Spacer Upgrade
$19.99Quick ViewAdd to cartAllows the caliper piston to remain square in its bore by taking up the difference between the caliper designed for 1″ rotors and the aftermarket .810″ thick rotor Results in more even pad wear and therefore longer pad life A must for expensive pads, protect your investment!
-
Large Bore Clip-In Wheel Cylinders For GM Drum Brakes
$35.99Quick ViewAdd to cartSold as a pair Increases stopping power of stock drum brakes significantly and noticeably Direct replacement for any “Clip-type” GM wheel cylinder Known fitment includes but is not limited to: >1978-1988 A/G-Body (Metric Chassis) >1982-1992 F-Body (factory drum rear) >1982-1990 S-10 / Sonoma
Reviews
There are no reviews yet.