Sold as a pair
Unidirectional, be sure to install the bleeder pointing up
Large bore front calipers have been redesigned to not only be lighter but stronger than the stock unit
These all new calipers deliver over 20% more clamping force at the rotor, much more than the popular but expensive “Blazer” upgrade
Maintaining stock dimensions allows serious brake power without needing to change to oversize wheels
Unlike almost every other front brake upgrade, these calipers are a direct bolt on. No machining or cutting required
Note: In very high heat applications we recommend removing the 4 O-rings in each caliper that ride on the slide pin
Weight | 10 lbs |
---|---|
Dimensions | 8 × 8 × 8 in |
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
You may also like…
-
MCP Speed Bleeders
$12.99Quick ViewAdd to cart>Fit stock front calipers for 1978-1988 A/G-Bodies, 1982-1992 F-Body front calipers, 1982-2002 2WD S-10 front calipers, and MCP rear disc upgrades for A/G-Bodies >Allows bleeding with only one person >Simply crack the bleeder as normal and it will allow fluid out but not suck air back in >Tighten when finished
-
1991-2002 2WD S-10 Basic Brake (Factory Drum Rear) Upgrade Kit
$99.99Quick ViewAdd to cartThe best bang for your buck brake upgrade on the market Replace old rubber hoses that can collapse and make the car pull when the brakes are applied (sound familiar?) Tighten up brake feel with DOT approved hoses that do not swell under pressure Larger bore bolt-in wheel cylinders refresh and improve the stopping power …
1991-2002 2WD S-10 Basic Brake (Factory Drum Rear) Upgrade KitRead More
-
1982-1990 2WD S-10 Basic Brake (Stock Drum Rear) Upgrade Kit
$105.99Quick ViewAdd to cartThe best bang for your buck brake upgrade on the market Replace old rubber hoses that can collapse and make the car pull when the brakes are applied (sound familiar?) Tighten up brake feel with DOT approved hoses that do not swell under pressure Larger bore clip-in wheel cylinders refresh and improve the stopping power …
1982-1990 2WD S-10 Basic Brake (Stock Drum Rear) Upgrade KitRead More
-
1991-2002 2WD S-10 DOT Approved Stainless Steel Braided Brake Hose Kit (Factory Drum Rear)
$69.99Quick ViewAdd to cartA must for any vehicle with rubber hoses as they swell, reducing stopping power and making the car pull to one side under braking Will significantly increase brake pedal feel The absolute best bang for your buck, inexpensive brake upgrade around. NOTE: Check the wrench size of your front flare nuts (nut on the …
1991-2002 2WD S-10 DOT Approved Stainless Steel Braided Brake Hose Kit (Factory Drum Rear)Read More
Related products
-
1982-2002 2WD S-10 Steering Link Kit
$219.99Quick ViewAdd to cartTeflon (PTFE) lined chromoly rod ends for maximum life and minimum friction Half the weight of the factory tie rod assembly All needed fasteners included Replaces both inner and outer tie rods instead of just the outer like competitor pieces Black 6061-T6 Hard anodized adjustment tube A must to improve both cornering and straight line …
-
1982-2002 2WD S-10 Adjustable Front Upper Control Arms
$524.99Quick ViewAdd to cartThe most affordable adjustable 2WD upper control arm on the market, in fact most competitors’ non adjustable arms are hundreds more 6061-t6 adjustment tubes Teflon (PTFE) lined chromoly rod ends for maximum life and minimum friction 7075 forged aluminum cross shaft Integral ball joint holder offers smaller and lighter packaging +1” Howe ball joints improve …
1982-2002 2WD S-10 Adjustable Front Upper Control ArmsRead More
-
1982-2002 2WD S-10 DOT Approved Front Brake Hoses
$45.99Quick ViewAdd to cartThis front only kit fills the need for S-10 trucks with rear end swaps such as the Ford 8.8 and 9″ Tighten up your brake pedal significantly and deliver more stopping power to your front calipers NOTE: Check the wrench size of your front flare nuts (nut on the hard line that connects to the …
-
Steering Link Bump Steer Spacers For Increased Accuracy
$15.99Quick ViewAdd to cartIncludes one pair each of .100″, .060″, .030″ spacers Increased accuracy to further adjust and reduce your bump steer, if needed One set does one car
Reviews
There are no reviews yet.