Teflon (PTFE) lined chromoly rod ends for maximum life and minimum friction
Half the weight of the factory tie rod assembly
All needed fasteners included
Replaces both inner and outer tie rods instead of just the outer like competitor pieces
Black 6061-T6 Hard anodized adjustment tube
A must to improve both cornering and straight line driving by reducing or altogether eliminating toe changes throughout suspension travel
Invaluable for vehicles with increased caster or lowered ride height as it corrects the negative effects on bump steer from those changes
Comes with anti seize pre-applied to aid in adjustment and prevent galling
Zero drilling or machining needed, 100% bolt on
Weight | 8 lbs |
---|---|
Dimensions | 21 × 4 × 4 in |
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
You may also like…
-
Steering Link Bump Steer Spacers For Increased Accuracy
$15.99Quick ViewAdd to cartIncludes one pair each of .100″, .060″, .030″ spacers Increased accuracy to further adjust and reduce your bump steer, if needed One set does one car
-
Rod End Spray by WD-40
$9.99Quick ViewAdd to cart> Dry spray eliminates the possibility of dirt and grit sticking to the bearing surface which prematurely wears rod ends > Contains Teflon to aid in friction reduction and prolonged life > Aids in AN hose assembly > Great for seat tracks, door hinges, carburator throttle shafts etc etc
Related products
-
1982-2002 A/4WD S-10 Adjustable Off-Road Steering Link Kit
$239.99Quick ViewAdd to cartTeflon (PTFE) lined chromoly rod ends for maximum life and minimum friction High travel rod ends offer 15° more travel in either direction than a standard rod end (maximum pin to adjustment tube misalignment 32°) High quality Moog brand inner tie rods, with 90 degree grease zerk for ease of maintenance All needed fasteners included …
1982-2002 A/4WD S-10 Adjustable Off-Road Steering Link KitRead More
-
1982-2002 2WD S-10 Adjustable Front Upper Control Arms
$524.99Quick ViewAdd to cartThe most affordable adjustable 2WD upper control arm on the market, in fact most competitors’ non adjustable arms are hundreds more 6061-t6 adjustment tubes Teflon (PTFE) lined chromoly rod ends for maximum life and minimum friction 7075 forged aluminum cross shaft Integral ball joint holder offers smaller and lighter packaging +1” Howe ball joints improve …
1982-2002 2WD S-10 Adjustable Front Upper Control ArmsRead More
-
1982-1990 2WD S-10 Basic Brake (Stock Drum Rear) Upgrade Kit
$105.99Quick ViewAdd to cartThe best bang for your buck brake upgrade on the market Replace old rubber hoses that can collapse and make the car pull when the brakes are applied (sound familiar?) Tighten up brake feel with DOT approved hoses that do not swell under pressure Larger bore clip-in wheel cylinders refresh and improve the stopping power …
1982-1990 2WD S-10 Basic Brake (Stock Drum Rear) Upgrade KitRead More
Reviews
There are no reviews yet.