1992-2002 2WD S-10 Rear Dual Caliper Kit W/o Parking Brake
$424.99
First kit of its kind for S-10 drifters
Brand new, non-junkyard parts
Kit Includes
>Left and right dual caliper brackets
>Left and right primary parking brake calipers
>Left and right secondary calipers
>4x Hoses from caliper to hard line (unless purchasing new hard line the factory line must be shortened and re-flared for the primary calipers)
>Left and right rotors
>Standard pads
>All necessary fasteners
Note: This kit only works with 15″ or larger wheels
Note: Plumbing and routing of hard line and hoses for the secondary calipers is up to the customer
Note: Some sources list the year GM changed housing flanges as 1988, if your housing flange is different than shown please use this kit
| Weight | 50 lbs |
|---|---|
| Dimensions | 12 × 12 × 12 in |
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
You may also like…
-
1982-2002 2WD S-10 MCP Rear Disc Brake Kit Caliper Spacer Upgrade
$19.99Quick ViewAdd to cartAllows the caliper piston to remain square in its bore by taking up the difference between the caliper designed for 1″ rotors and the aftermarket .810″ thick rotor Results in more even pad wear and therefore longer pad life A must for expensive pads, protect your investment!
-
Universal Proportioning Valve
$42.99Quick ViewAdd to cartUniversal proportioning valve placed in-line with the rear hard line will modulate the rear brakes Rear brakes applying harder and locking before the front is extremely dangerous and when installed and adjusted right this helps to eliminate that
-
1982-2002 2WD S-10 Front Drilled / Slotted Rotor Upgrade
$99.99Quick ViewAdd to cartSold as a pair Upgrade the look of your ride with our drilled and slotted slotted rotors Direct bolt on with simple installation steps Does include tone ring for vehicles equipped with ABS *These are NOT recommended for actual track use as high heat will cause cracking around the holes
-
1982-1988 2WD S-10 Disc/Disc Adjustable Combination (Proportioning) Valve Upgrade
$82.99Quick ViewAdd to cartDirectly bolts in place of factory unit Aftermarket combination valve, for cars with rear disc brake upgrades Allows adjustment of rear pressure to better match the front brakes Comes with bleed tool included TOO MUCH REAR BRAKE CAN BE A SAFETY HAZARD
Related products
-
1982-1990 2WD S-10 Basic Brake (Stock Drum Rear) Upgrade Kit
$105.99Quick ViewAdd to cartThe best bang for your buck brake upgrade on the market Replace old rubber hoses that can collapse and make the car pull when the brakes are applied (sound familiar?) Tighten up brake feel with DOT approved hoses that do not swell under pressure Larger bore clip-in wheel cylinders refresh and improve the stopping power …
1982-1990 2WD S-10 Basic Brake (Stock Drum Rear) Upgrade KitRead More
-
Steering Link Bump Steer Spacers For Increased Accuracy
$15.99Quick ViewAdd to cartIncludes one pair each of .100″, .060″, .030″ spacers Increased accuracy to further adjust and reduce your bump steer, if needed One set does one car
-
1992-2002 2WD S-10 Rear Disc Brake Kit W/ Parking Brake
$359.99Quick ViewAdd to cartReplace old heavy drums with easy to maintain disc brakes Brand new, non-junkyard parts Kit Includes >Left and right caliper brackets >Left and right calipers >Hoses from caliper to hard line (unless purchasing new hard line the factory line must be shortened and re-flared) >Left and right rotors >Standard pads >All necessary fasteners Note: This …
1992-2002 2WD S-10 Rear Disc Brake Kit W/ Parking BrakeRead More
-
Large Bore Clip-In Wheel Cylinders For GM Drum Brakes
$35.99Quick ViewAdd to cartSold as a pair Increases stopping power of stock drum brakes significantly and noticeably Direct replacement for any “Clip-type” GM wheel cylinder Known fitment includes but is not limited to: >1978-1988 A/G-Body (Metric Chassis) >1982-1992 F-Body (factory drum rear) >1982-1990 S-10 / Sonoma
Reviews
There are no reviews yet.