Large Bore Bolt-In Wheel Cylinders For GM Drum Brakes
$35.99
Sold as a pair
Increases stopping power of stock drum brakes significantly and noticeably
Direct replacement for any ~1.367″ bore backing plate that uses bolt-in wheel cylinder
Known fitment includes but is not limited to:
>1964-1967 A-Body
>1968-1972 A-Body
>1973-1977 A-Body
>1977-1996 B-Body*
>1970-1981 F-Body
>1993-1997 F-Body
>1968-1974 X-Body
>1992-2002 S-10
Note: The oversize vs. stock brake force gain percentage depends on the original size of the wheel cylinders equipped on the vehicle as the vehicles listed above came with a variety of sizes
* Note: Please be sure verify the bore of your backing plate ~1.485″ is also a common GM backing plate hole dimension. Full size B-Body cars used both depending on options
| Weight | 5 lbs |
|---|---|
| Dimensions | 6 × 6 × 6 in |
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
Related products
-
1970-1981 F-Body Disc/Disc Adjustable Combination (Proportioning) Valve Upgrade
$82.99Quick ViewAdd to cartDirectly bolts in place of factory unit Aftermarket combination valve, for cars with rear disc brake upgrades Allows adjustment of rear pressure to better match the front brakes Comes with bleed tool included TOO MUCH REAR BRAKE CAN BE A SAFETY HAZARD
-
1964-1967 A-Body Rear Trailing Arm Fastener Set
$22.99Quick ViewAdd to cartIncludes -8x Grade 8 1/2-13 bolts -8x Grade 8 1/2-13 nylon insert nuts -16x Grade 8 1/2 SAE flat washers All yellow zinc coated for rust prevention Torque to 75 lb/ft
-
1970-1981 F-Body 10/12-Bolt Rear Disc Brake Kit W/o Parking Brake
$324.99Quick ViewAdd to cartReplace old heavy drums with easy to maintain disc brakes Brand new, non-junkyard parts Kit Includes >Left and right caliper brackets >Left and right calipers >Hoses from caliper to hard line (unless purchasing new hard line the factory line must be shortened and re-flared) >Left and right rotors >Standard pads >All necessary fasteners Note: This …
1970-1981 F-Body 10/12-Bolt Rear Disc Brake Kit W/o Parking BrakeRead More
-
GM Polyurethane Trailing Arm Bushings 1964-2002
$34.99Quick ViewAdd to cartSold in pairs When replacing upper trailing arms be sure to check the condition of your upper housing bushings Polyurethane offers a tighter suspension feel while still eliminating a moderate amount of road harshness New parts to replace worn and cracked factory rubber Fits >64-67 68-72 73-77 78-88 midsize A/G-Body cars, all 8 rear end …
Reviews
There are no reviews yet.