Outpacing (or out-stopping) this kit requires thousands of dollars
Includes our rear disc kit w/ parking brake
Braided hoses for the front and frame to rear end to tighten brake feel
Large bore front calipers deliver more clamping force to the rotor
Brand new, non-junkyard parts
Note: The MCP rear disc brake conversion included in this kit only works with 15″ or larger wheels
Note: We do not include front rotors, we recommend sourcing them locally. If using aggressive pads which are hard on rotors (like our Hawk pad upgrade) we recommend purchasing lifetime warranty rotors and switching them as needed
Note: In very high heat applications we recommend removing the 4 O-rings in each caliper that ride on the slide pin
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
You may also like…
-
1978-1988 A/G-Body Pre-Bent Stainless Steel Rear Hard Lines For Disc Brake Upgrade On Factory Rear
$44.99Quick ViewAdd to cart>Eliminates need to shorten factory lines >Pre-bent for a perfect fit >Pre-flared for a truly bolt on design >Stainless steel to last a lifetime Note: Must be used with the stainless braided line upgrade, standard hoses in the disc brake upgrade kit are too short *Actual part not shown
-
1982-2002 2WD S-10 DOT Stainless Steel Braided Hose for MCP Rear Disc Kit Upgrade
$45.99Quick ViewAdd to cartA great upgrade to our rear brake kits, eliminating the rubber hose and replacing with stainless braided hose will significantly improve pedal feel by transferring braking power that was lost in the swelling of the rubber hose to the caliper
-
1978-1988 A/G-Body Front Drilled / Slotted Rotor Upgrade
$99.99Quick ViewAdd to cartSold as a pair Upgrade the look of your ride with our drilled and slotted slotted rotors Direct bolt on with simple installation steps Does include tone ring for vehicles equipped with ABS *These are NOT recommended for actual track use as high heat will cause cracking around the holes
-
1978-1988 A/G-Body Disc/Disc Combination (Proportioning) Valve Upgrade
$49.99Quick ViewAdd to cartFactory Disc/Disc valve, for cars with rear disc brake kits Note: May come as pictured or anodized to a brass color like the stock unit depending on what is in stock
Related products
-
1978-1988 A/G-Body Adjustable Rear Upper Trailing Arm Kit
$199.99Quick ViewAdd to cartSold as a complete pair Teflon (PTFE) lined chromoly rod ends for maximum life and minimum friction 6061-T6 aluminum adjustment tube Comes with anti seize pre-applied to aid in adjustment and prevent galling
-
Large Bore Clip-In Wheel Cylinders For GM Drum Brakes
$35.99Quick ViewAdd to cartSold as a pair Increases stopping power of stock drum brakes significantly and noticeably Direct replacement for any “Clip-type” GM wheel cylinder Known fitment includes but is not limited to: >1978-1988 A/G-Body (Metric Chassis) >1982-1992 F-Body (factory drum rear) >1982-1990 S-10 / Sonoma
-
1978-1988 A/G-Body Large Bore Front Calipers
$149.99Quick ViewAdd to cartSold as a pair Unidirectional, be sure to install the bleeder pointing up Large bore front calipers have been redesigned to not only be lighter but stronger than the stock unit These all new calipers deliver over 20% more clamping force at the rotor, much more than the popular but expensive “Blazer” upgrade Maintaining stock …
-
1978-1988 A/G-Body DOT Approved Stainless Steel Braided Brake Hose Kit
$84.99Quick ViewAdd to cartIncludes frame to rear end hose that most kits do not A must for any vehicle with rubber hoses as they swell, reducing stopping power and making the car pull to one side under braking Will significantly increase brake pedal feel The absolute best bang for your buck, inexpensive brake upgrade around
Reviews
There are no reviews yet.