Replace old heavy drums with easy to maintain disc brakes
Brand new, non-junkyard parts
Kit Includes
>Left and right caliper brackets
>Left and right calipers
>Hoses from caliper to hard line (unless purchasing new hard line the factory line must be shortened and re-flared)
>Left and right rotors
>Standard pads
>All necessary fasteners
*Shown with optional braided hoses and replacement stainless hard line
Note: This kit only works with 15″ or larger wheels
Weight | 50 lbs |
---|---|
Dimensions | 12 × 12 × 12 in |
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
You may also like…
-
Universal Proportioning Valve
$42.99Quick ViewAdd to cartUniversal proportioning valve placed in-line with the rear hard line will modulate the rear brakes Rear brakes applying harder and locking before the front is extremely dangerous and when installed and adjusted right this helps to eliminate that
-
1978-1988 A/G-Body Disc/Disc Adjustable Combination (Proportioning) Valve Upgrade
$82.99Quick ViewAdd to cartDirectly bolts in place of factory unit Aftermarket combination valve, for cars with rear disc brake upgrades Allows adjustment of rear pressure to better match the front brakes Comes with bleed tool included TOO MUCH REAR BRAKE CAN BE A SAFETY HAZARD
-
Hawk Performance Pads
$77.99Quick ViewAdd to cartDon’t upgrade your entire brake system just to leave daily driver quality pads on your ride. Get the absolute most out of your MPC brakes Pads fit: >MPC rear disc brake kits >1982-2002 2WD S-10 front calipers >1982-2002 F-body front calipers >1978-1988 A/G-Body front calipers Note: Sold as an axle set, meaning two sets are …
-
1978-1988 A/G-Body MCP Rear Disc Brake Kit Drilled / Slotted Rotor Upgrade
$79.99Quick ViewAdd to cartUpgrade your MCP rear disc brake kit to include drilled and slotted rotors *These are NOT recommended for actual track use as high heat will cause cracking around the holes
Related products
-
1978-1988 A/G-Body Rear Trailing Arm Fastener Set
$22.99Quick ViewAdd to cartIncludes -8x Grade 8 1/2-13 bolts -8x Grade 8 1/2-13 nylon insert nuts -16x Grade 8 1/2 SAE flat washers All yellow zinc coated for rust prevention Torque to 75 lb/ft Note: The factory fastener size was 12mm, meaning the holes are a hair(<.020) smaller than the fasteners, a 1/2″ drill bit will make very …
-
1978-1988 A/G-Body Adjustable Front Upper Control Arms
$524.99Quick ViewAdd to cartThe most affordable adjustable upper control arm on the market, in fact most competitors’ non adjustable arms are hundreds more 6061-t6 adjustment tubes Teflon (PTFE) lined chromoly rod ends for maximum life and minimum friction 7075 forged aluminum cross shaft Integral ball joint holder offers smaller and lighter packaging +1” Howe ball joints improve camber …
1978-1988 A/G-Body Adjustable Front Upper Control ArmsRead More
-
1978-1988 A/G-Body Performance Disc Brake Kit W/ Parking Brake
$549.99Quick ViewAdd to cartOutpacing (or out-stopping) this kit requires thousands of dollars Includes our rear disc kit w/ parking brake Braided hoses for the front and frame to rear end to tighten brake feel Large bore front calipers deliver more clamping force to the rotor Brand new, non-junkyard parts Note: The MCP rear disc brake conversion included in …
1978-1988 A/G-Body Performance Disc Brake Kit W/ Parking BrakeRead More
-
Large Bore Clip-In Wheel Cylinders For GM Drum Brakes
$35.99Quick ViewAdd to cartSold as a pair Increases stopping power of stock drum brakes significantly and noticeably Direct replacement for any “Clip-type” GM wheel cylinder Known fitment includes but is not limited to: >1978-1988 A/G-Body (Metric Chassis) >1982-1992 F-Body (factory drum rear) >1982-1990 S-10 / Sonoma
Reviews
There are no reviews yet.