1978-1988 A/G-Body Performance Disc Brake Kit W/o Parking Brake
$499.99
Outpacing (or out-stopping) this kit usually requires thousands of dollars
Includes our rear disc kit w/o parking brake
Braided hoses for the front and from the frame to rear end to significantly tighten brake feel
Large bore front calipers deliver more clamping force to the rotor
All brand new, non-junkyard parts
Note: The MCP rear disc brake conversion included in this kit only works with 15″ or larger wheels
Note: We do not include front rotors, we recommend sourcing them locally. If using aggressive pads which are hard on rotors (like our Hawk pad upgrade) we recommend purchasing lifetime warranty rotors and switching them as needed
Note: In very high heat applications we recommend removing the 4 O-rings in each caliper that ride on the slide pin
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
You may also like…
-
1978-1988 A/G-Body MCP Rear Disc Brake Kit Caliper Spacer Upgrade
$19.99Quick ViewAdd to cartAllows the caliper piston to remain square in its bore by taking up the difference between the caliper designed for 1″ rotors and the aftermarket .810″ thick rotor Results in more even pad wear and therefore longer pad life A must for expensive pads, protect your investment!
-
Universal Proportioning Valve
$42.99Quick ViewAdd to cartUniversal proportioning valve placed in-line with the rear hard line will modulate the rear brakes Rear brakes applying harder and locking before the front is extremely dangerous and when installed and adjusted right this helps to eliminate that
-
Hawk Performance Pads
$77.99Quick ViewAdd to cartDon’t upgrade your entire brake system just to leave daily driver quality pads on your ride. Get the absolute most out of your MPC brakes Pads fit: >MPC rear disc brake kits >1982-2002 2WD S-10 front calipers >1982-2002 F-body front calipers >1978-1988 A/G-Body front calipers Note: Sold as an axle set, meaning two sets are …
-
1978-1988 A/G-Body Disc/Disc Combination (Proportioning) Valve Upgrade
$49.99Quick ViewAdd to cartFactory Disc/Disc valve, for cars with rear disc brake kits Note: May come as pictured or anodized to a brass color like the stock unit depending on what is in stock
Related products
-
Steering Link Bump Steer Spacers For Increased Accuracy
$15.99Quick ViewAdd to cartIncludes one pair each of .100″, .060″, .030″ spacers Increased accuracy to further adjust and reduce your bump steer, if needed One set does one car
-
Large Bore Clip-In Wheel Cylinders For GM Drum Brakes
$35.99Quick ViewAdd to cartSold as a pair Increases stopping power of stock drum brakes significantly and noticeably Direct replacement for any “Clip-type” GM wheel cylinder Known fitment includes but is not limited to: >1978-1988 A/G-Body (Metric Chassis) >1982-1992 F-Body (factory drum rear) >1982-1990 S-10 / Sonoma
-
GM Monoball Trailing Arm Bushings 1964-2002
$99.99Quick ViewAdd to cartSold in pairs When replacing upper trailing arms be sure to check the condition of your upper housing bushings Monoballs offer friction free articulation between the limits of their travel, with the drawback being increased road vibrations New parts to replace worn and cracked factory rubber Fits >64-67 68-72 73-77 78-88 midsize A/G-Body cars, all …
-
1978-1988 A/G-Body Rear Trailing Arm Fastener Set
$22.99Quick ViewAdd to cartIncludes -8x Grade 8 1/2-13 bolts -8x Grade 8 1/2-13 nylon insert nuts -16x Grade 8 1/2 SAE flat washers All yellow zinc coated for rust prevention Torque to 75 lb/ft Note: The factory fastener size was 12mm, meaning the holes are a hair(<.020) smaller than the fasteners, a 1/2″ drill bit will make very …
Reviews
There are no reviews yet.